Ball bearing

A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races.


The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.


Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area between the balls and races. However, they can tolerate some misalignment of the inner and outer races.


  • 24036MBW33 Spherical roller bearing with relubrication features
    24036MBW33 Spherical roller bearing with relubrication features
    Spherical roller bearing with relubrication featuresSpherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts.Accommodate misalignmentHigh load carrying capacityRelubrication featuresLow friction and long service lifeIncreased wear resistance
  • F683H Miniature & Instrument Series, Stainless Steel Ball Bearing
    F683H Miniature & Instrument Series, Stainless Steel Ball Bearing
    Product DetailsSpecifications    Bearing Type    Flanged Open    Bore Dia (d)    3.000    mm    Outer Dia (D)    7.000    mm    Radius (min) (rs)    0.10    mm    Dynamic Load Rating (Cr)    264    N    Static Load Rating (Cor)    90    N    Max Speed (Grease)    63,000    rpm    Max Speed (Oil)    75,000    rpm    Ball Qty    8    Ball Dia (Dw)    1.000    mm    Width (B)    2.000    mm    Flange Dia (Df)    8.100    mm    Flange Width (Bf)    0.50    mm    Max. Shaft Shoulder Dia. Inner (Li)    4    mm    Min. Housing Shoulder Dia., Outer (Lo)    6    mm    Weight (g)    0.37    grams    Precision    A1    Standard Clearance    K25    Material    Martensitic Stainless Steel    
  • 2202-2RS Self Aligning Ball Bearing 15x35x14 Rubber Sealed
    2202-2RS Self Aligning Ball Bearing 15x35x14 Rubber Sealed
    Inner Diameter:15mmOuter Diameter:35mmWidth:14mmClosure Type:Rubber SealedMaterial:Chrome Steel SAE-52100Lubrication:Chevron SRI-2 GreaseStatic Load:389 lbfDynamic Load:1,731 lbfSpeed Limit:15,000 RPMCountry of Origin:China
  • RK6-25P1Z Four Point Contact Slewing Beraing
    RK6-25P1Z Four Point Contact Slewing Beraing
    Slewing Ring Bearings RK6-25P1Z*Inner Diameter:  534.162mm*Outer Diameter:  748.03mm*Height: 56mm*Lightweight four-point contact ball slewing ring*thin flange design for inner and outer rings*with mounting holes
  • 51144 THRUST BALL BEARING with brass cage/iron cage 220*270 *37mm
    51144 THRUST BALL BEARING with brass cage/iron cage 220*270 *37mm
    51144 THRUST BALL BEARING with brass cage/iron cage 220*270 *37mm
  • RMS6-2RS DEEP GROOVE BALL BEARING
    RMS6-2RS DEEP GROOVE BALL BEARING
    SIZE:19.05*50.8*17.46mmWEIGHT:0.18KG
  • WXING bearing, quality inspection at the same time during production
    WXING bearing, quality inspection at the same time during production
    WXING bearing, quality inspection at the same time during productionEnsure that every product delivered to you is a qualified product
  • How to choose a suitable bearing Deep groove ball bearing ZZ 2RS
    How to choose a suitable bearing Deep groove ball bearing ZZ 2RS
    There are hundreds and thousands of bearings in the world, among them, this type have more than half of these bearings.The Deep groove ball bearing, which is the most common type of rolling bearing and is also the most widely used.Do you know what types of deep groove ball bearings are commonly used?open typeZZ: Steel seal2RS: Rubber seal
  • Customized Angular contact bearing manufacturers From China
    Customized Angular contact bearing manufacturers From China
    The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.Angular contact ball bearings can bear both radial and axial loads.It can work at high speed.The larger the contact Angle, the higher the axial bearing capacity.The contact Angle is the Angle between the contact point line of the ball and the racewayin the radial plane and the vertical line of the bearing axis.High precision and high speedbearings usually have a 15 degree contact Angle.The contact Angle increases under theaction of axial force Single row angular contact ball bearings: machine tool spindle, high frequency motor, combustion turbine, centrifugal separator, arc welding machine double row angular contact ball bearings: oil pump, roots blower, air compressor, all kinds of transmission,fuel injection pump, printing machinery, extraction equipment and so on.ZHEJIANG WAXING ELECTROMECHANICAL CO.LTD. Customized Angular contact bearing manufacturers From China,MOQ1
  • Intro to Deep groove ball bearing ZHEJIANG WAXING ELECTROMECHANICAL CO.LTD.
    Intro to Deep groove ball bearing ZHEJIANG WAXING ELECTROMECHANICAL CO.LTD.
    ZHEJIANG WAXING ELECTROMECHANICAL CO.LTD. Intro to Deep groove ball bearing ZHEJIANG WAXING ELECTROMECHANICAL CO.LTD.,Passed ISO9001 international certificationDeep groove ball bearings are the most widely used bearing type and are extremely versatile. This kind of bearing has the characteristics of low friction, low noise and low vibration after optimization, so as to achieve high speed. They can adapt to radial and axial loads in both directions, are easy to install, and require less maintenance than other types of bearings.
  • High Quality Thrust ball  bearing Wholesale
    High Quality Thrust ball bearing Wholesale
    Thrust ball bearings are designed to withstand thrust loads at high speeds and consist of awasher-like ferrule with ball rolling groove grooves.Since the ferrule is a cushion shape, the thrust ball bearing is divided into two types: a flatbase cushion type and a self- aligning spherical seat cushion type.The shaft ring, race and rlling element of the bearing are separated and can be assembledand disassembled separately.Main uses: crane hooks, three-dimensional pumps, vertical centrifuges, jacks, low-profile re-ducers, etc.ZHEJIANG WAXING ELECTROMECHANICAL CO.LTD. High Quality Thrust ball  bearing Wholesale - ZHEJIANG WAXING ELECTROMECHANICAL CO.LTD.,MOQ1
  • Custom Deep groove ball bearings Manufacturer
    Custom Deep groove ball bearings Manufacturer
    Deep groove ball bearings are the most common type of rolling bearings. The basic deepgroove ball bearing consists of an outer ring, an inner ring, a set of steel balls and a set ofcages. The bearing has small friction coefficient, high limit rotation speed, simple structure,low manufacturing cost and easy to achieve high manufacturing precision. Dimensionalrange and form are varied, and it is used in precision instruments, low noise motors, automo-biles, motorcycles and general machinery. It is the most widely used type of bearing in themachinery industry. Deep groove ball bearings can be used in gearboxes, instrumentation,motors, household appliances, internal combustion engines, transportation vehicles, agricul-tural machinery, construction machinery, construction machinery, roller skates, etc.

Send your inquiry